4 quarts
engine US measure metric measure 4.7 liter 17qt 16L 5.2 liter 14.3qt 13.5L 5.9 liter 14.3qt 13.5L
sixteen liters
Under to black rubber caps on the very top of the engine. Remove the black caps and the plugs are reset about 4 inches down.
Yes
16l/100kms :( city 10l/100kms :I Highway
There is a hole in the sprocket that has to line up with a notch in the front bearing cap. This will be TDC. I just hope you had it on compression stroke when you took it off. Otherwise it'll be 180 degrees out of time and won't start. If that happens you can either remove it and rotate the crank and cam 180 degrees until you marks line up again or remove the distributor and rotate it 180 and re-install it.
on the highway doing 100km/h i get 16l/100k. i have a 02, about 7000lbs with ladders on the roof.
If you are facing the motor, it is on the right side, under the plastic housing. To replace the timing belt,you will need to remove the valve cover, remove a/c belt and PS belt. The motor mount will also need to be disconnected and the motor raised slightly.
you can't unless you have the computer to plug in the diagnosis port...it's all controled via the ecm!!!
12 and 4. Either one can be the length, the other is the width. To solve algebraically: 2L + 2W = 32 L x W = 48 substitute the L value for W (W = 16-L) L (16-L) = 48 -L2 +16L -48 = 0 L2 -16L + 48 = 0 (L-12)(L-4) = 0
You cannot. As it is EFI, therefore controlled electronically, you would need to plug it into a diagnostic computer to access the idle speeds etc.
What is the value of a goodwin bros platter flower pattern 16L by 11 1/2W stamped on back pearl white goodwin bros.