The cam sensor is the "pick up plate" in the distributor, under the rotor.
how do you replace a cam shaft sensor in a 2002 3.3L dodge grand caravan
The cam sensor on the 4 cylinder is on the end of the head. On a 6 cylinder it is on the front timing cover.
The cam sensor on a 2002 Grand Caravan is located on the top of the engine. It is at the top, just below the valve cover.
A 1989 5.9L Cummins does not have a cam sensor.
Look where a distributor would be if it were an older engine-serves same purpose.
The 2002 Dodge Durango has single overhead cam (SOHC).
if its the 3.5L the sensor is right on top, at the front of the engine. the cam sensor is near it just to the driver side of the top of the engine. The intake has to be loosened enough to get the cam sensor out form under it. The crank sensor is easier to get out.
A bad cam or crank sensor can cause a no start, but the engine will still crank or turn over.
The cam sensor is under the front of the passenger side cylinder head.
The cam sensor on a Dodge 4.7L is under the front outside of the passenger side cylinder head.
There is no "oil cam sensor". There is a oil pressure sensor and a cam sensor, but they are two different sensors.