0
What else can I help you with?
How do you reset the 'check engine' light once an 02 Sensor has been replaced on a '95 Mazda Millenia?
you need an on board diagnostic scaner
What liter engine is in Mazda millenia 2001?
The millenia P - has 2.5 liter engine, The Millenia S has a 2.3 liter engine
Is there something you can do to stop the check engine light from coming on saying bank 1 and 2 lean after installing cold air intake?
Sometimes you can connect the diagnostic tool and it will reset the check engine light. You can have Auto Zone or Advanced Auto connect the diagnostic tool for free.
What do I do first the 95 Saturn SL2 I just bought now has its check engine light on?
Connect an engine diagnostic scanner to find out what is wrong.
How do you read diagnostic codes on 1990 300zx?
To read diagnostic codes on a 1990 Nissan 300ZX, first, locate the diagnostic connector under the driver's side dashboard. Use a jumper wire to connect terminals E1 and TE1 in the connector. Then, turn the ignition key to the "on" position without starting the engine; the check engine light will blink the diagnostic codes. Count the blinks to interpret the codes according to the Nissan service manual for troubleshooting.
How do you connect an engine code scanner to a 1989 ford bronco?
To connect an engine code scanner to a 1989 Ford Bronco, locate the diagnostic connector, which is typically found under the dashboard near the steering column. Use a compatible OBD-I scanner, as the Bronco from this year utilizes the OBD-I system. Plug the scanner into the connector, turn the ignition key to the "on" position without starting the engine, and follow the scanner's instructions to retrieve any diagnostic trouble codes.
Is Mazda millenia and Mazda 626 have the same engine?
The 626 and the Millenia share the same 2.5 liter engine,the only difference being the version in the millenia makes more power.
How do you get engine codes from a 1992 Suzuki sidekick?
To retrieve engine codes from a 1992 Suzuki Sidekick, you need to locate the diagnostic connector, typically found near the driver's side under the dashboard. Use a jumper wire to connect terminals A and B on the diagnostic connector, then turn the ignition key to the "On" position without starting the engine. The check engine light will blink a series of codes that correspond to specific diagnostic trouble codes (DTCs). Count the blinks to identify the codes, which can then be cross-referenced with a service manual for interpretation.
How many coils do a 2000 Mazda millenia s have?
a Mazda millenia with a miller cycl engine 2.3 engine has 6 igition coils
How do you connect a Dodge Durango engine to a laptop?
You would have to write your own diagnostic software, because there isn't any available software to do that.
Is the 1999 Mazda millenia have an interference engine?
2.5L V-6 Mazda Millenia engine is a non-interference engine. If your timing belt pops, you will not damage your valves, like I did in my Diamante
How do you check for diagnostic codes in a 1989 Acura Legend?
To check for diagnostic codes in a 1989 Acura Legend, first, locate the diagnostic connector, usually found under the dashboard near the driver's side. Use a jumper wire to connect terminals A and B of the connector. Turn the ignition to the "ON" position without starting the engine, and watch for the check engine light, which will begin to blink in a specific sequence to indicate any stored diagnostic codes. Count the blinks to interpret the codes according to the vehicle's service manual.
