Angle sensor shaft
if it is a 96 like mine it is on the top of the coolant resovoir. it is rounnd and has an electrical connector attached to it
You could find information about hid headlights on Wikipedia, at http://en.wikipedia.org/wiki/Headlamp. Hid headlights are usually attached to the front of a vehicle like a car or motorcycle.
It has both. The difference between a long block and short block is whats on them. A short block is just that the Block with the pistons and crankshaft. A long block would be the short block with the heads and valve cover attached without any accessories attached.
it's the box attached to the windscreen behind the rear view mirror
engine without transmission is 150kg depending on which accessories are attached.
An accessory shoe is a clip or track on a camera which allows for accessories to be attached.
there is an electrical switch called a brake sending unit attached to the brake pedal under the dash check that there is an electrical switch called a brake sending unit atatched to the brake pedal under the dash check that
What device is it attached to?
Electrical devices such as plugs, connectors, or cords are typically attached to a receptacle for power supply purposes.
The headlights on a 2005 Chevy Optra are changed by opening the hood, removing the wring harness from the headlight assembly and twisting the bulb. A new bulb can then be attached and the assembly locked into position.
The float is part of the sending unit which is attached to the fuel pump. If you are replacing the fuel pump it should be attached when you pull the pump from the tank.
The headlights are controlled by the computer attached to the under hood fuse box. There are no external fuses.