You can get your 1994 Chevy S 10 pickup truck hood latch unstuck by spraying a lubricant on the latching mechanism. You can also remove the hood latch retaining bolts to bypass the stock release cable.
In order to fix a stuck thermostat in a 1994 Ford truck, one should take the truck to a certified Ford mechanic to complete the work.
Remove door panel and replace latch mechanism
Try disconnecting your battery and reconnecting it this should reset the door.
To fix the hood latch on a 1994 Toyota Corolla, first, inspect the latch mechanism for any visible damage or debris. If it's stuck, try lubricating it with WD-40 or a similar penetrating oil. If the latch is broken, you may need to remove it by unscrewing the bolts and replacing it with a new one. Ensure the hood release cable is functioning properly and not stretched or damaged, as this could also affect latch operation.
It depends how it's jammed. Do you ever put anything that might be liquid (such as an empty soda can) in the door pocket? In my SC300, if I do this, sometimes the liquid leaks out onto the bottom door seal and solidifies. The result is a pretty firmly stuck door!
In the glove box.
you need to go to the buick dealer and buy a new module and replace. it cost me 15.00 for a 92 park ave. easy job 10 min.
I had the same problem had someone push down hard on the front hood while I pulled the inside hood release then put wd 40 lubricant.
need diagram for 1994 chevy truck serpentine belt?
the oil filter on a 1994 Isuzu truck is located just below the a/c/ compressor, you will have to get under the truck from the front to see it.
need diagram for heater core for a 1994 Chevy truck.
Big Ol' Truck was created in 1994.