answersLogoWhite

0

First, lift up the front and take off the wheels with a tire iron. Next, unbolt the brake caliper using the 3/8-inch ratchet and socket, pull it off the spindle and hang the caliper by the upper control arm. Then, remove the dust cap using a hammer and flathead screwdriver and remove cotter pin in the middle of the spindle using the cotter-pin puller. Finally, unbolt the spindle nut in the middle of the rotor pull the rotor off the spindle and remove the bearings on both sides.

User Avatar

Wiki User

10y ago

What else can I help you with?

Related Questions

How to change wheel bearing on a 2004 Lincoln aviator?

How to replace rear wheel bearings on Lincoln aviator


How do you replace wheel bearings on 2004 GMC envoy?

how to replace wheel bearings on 2004 GMC envoy?


What is the cost of changing wheel bearings on a Mercury Mountaineer?

wheel bearings mountaineer 2004


How do you change front wheel bearings on 2004 mercury mountaineer?

My front wheel bearings just went in my 04 mountaineer, and we tried to replace them ourselves, but in order to get to the bearings you have to have the truck up on a lift, so unfortunately we had to send it to a mechanic.


How do you replace the rear wheel bearings on a 2004 Kia Sedona minivan?

I recently did this for my 2004. I found it was cheaper to replace the entire wheel hub then to buy the bearings. The bonus is the new wheel hub comes with the bearings already to go.


How do you repack the rear wheel bearings on a 2004 sportster?

You don't. They are sealed bearings pressed into the rim.


How do you change front wheel bearings on an 2004 Nissan Titan?

To change the front wheel bearings on a 2004 Nissan Titan, first, lift the vehicle and remove the front wheel. Next, detach the brake caliper and rotor, then remove the hub assembly by unbolting it from the steering knuckle. Press the old bearings out of the hub and press in the new ones, ensuring they're properly seated. Reassemble by reversing the steps, making sure to torque all bolts to the manufacturer's specifications.


Do you have to repack the wheel bearing on a 2004 Jeep Liberty if you replace the back brake rotors?

No. The bearings are not that type.No. The bearings are not that type.


How do you change front wheel bearings 2004 Ford Ranger?

Why are you changing wheel bearings so soon on a 2004 ? shouldn't this still be under warranty ???? I have a 1998 with 192,000 miles (I am the original owner) and have never changed the front wheel bearings ... They are still good too. I don't know about a 2004.... but on my 98, when I did the front brakes, I changed the front rotors too. New rotors came with new races installed in them already. Get new seals and Just clean and repack the bearings with grease and set the pre-load properly. Thats my 2cents worth. Good luck


What is the cost to replace wheel bearings in 2004 Buick Rendezvous?

I purchased the bearings and had my repair man do it. Very reasonable about $200


Where are the wheel bearings located on a 2004 jeep grand Cherokee?

In the brake rotors.


Adjust front wheel bearings on a Dodge truck 2 wheel drive 2004?

they are not adjustable they are sealed units