Turn the ignition key to the on/acc position without the engine running. Press the accelerator 3 times within 5 seconds. Turn the key to the off position and then fire up the engine. The oil message should be gone. this is supposed to be done every time the oil has been changed.
you just open the light and change it or pet boys
There is no separate warning indicator for the transmission on your Impala - the Service Engine Soon light will illuminate if there is a problem - you must have the codes read with a scan tool to retrieve them. By the way, what kind of problem are you having?
Hi i have an 2001 Chevy impala and my service traction Light is on. plus my safety brake is locked
How do you change a tag light on a 2002 impala
Fix a "door ajar" on Chevy Impala 2003 . Still on doors closed.
my 05 Chevy impala brake light come on when my vehicle is turned off killing my battery.
Listed in detail in your owner's manual. Don't have one then you need to get one.
With engine off. Turn key to on. Press accelerator fully three times. This should reset light.
To reset the oil change light on a 2013 Chevy Impala, first turn the ignition to the "On" position without starting the engine. Press the gas pedal three times within five seconds. After that, turn the ignition off, then start the engine to ensure the oil change light is reset. If the light remains on, repeat the process.
What does trac off and abs light mean on a 2004 chevy impala
try turning key on (don't start) then pump gas to floor 6 times, light should flash then go out (works with many chevy's, but not sure about Impala)
you will probably have to loosen the complete light assembly so you can get you hand in back of the light to change the bulbs, once you can get to them unplug the wires to the bulb and then either pull or twist the bulb out.