answersLogoWhite

0

From the front of the head it's EIIEEIIE. This is the same on both sides - (I=Intake, E=Exhaust)

With the valve covers off the rocker that aligns with the exhaust port is the exhaust the other will align with the intake manifold runner this would be your intake

User Avatar

Wiki User

11y ago

What else can I help you with?

Related Questions

What is a 330545 Chevy head casting?

1973 350 Corvette. 76cc chambers. 2.02`` intake valves 1.6`` exhaust valves.


What are the valve size differences between a 305 and a 350 Chevy?

305s had 1.72" intakes with 1.50" exhaust valves. Depending on the 350, it could be the same, or have either 1.94" intake and 1.50" exhaust, or 2.02" intake with 1.60" exhaust.


What are the stock diameters for the intake and exhaust valves on a 1978 Chevy 350?

You need to get a Casting # book and look up which heads you have.


Which is intake valve on Chev 350?

Intake valves are larger than exhaust valves, and are aligned with the intake runners on the intake manifold.


Trying to set the set valves on 350 which valve is the intake and which is the exhaust you have found tdc and set the 1 valves now what?

The intake valves line up with the intake runners on the intake manifold. The exhaust valves line up with the exhaust runners on the exhaust manifold or headers. With #1 at tdc you can set 1,2,5,7 intake and 1,3,4,8 exhaust valves. Rotate the engine one revolution to #6 tdc and set the remaining valves.


What valve is the intake valve on a 1985 350?

the bigger valve is always the intake valve on any car......you have a 350 so its a v8 so you have 8 intake valves and 8 exhaust valves ..........


Are the valves in a 5.7 350 vortec in the heads?

yes there are 8 intake valves and 8 exhaust valves in the set of heads


What size valves are in 1978 chevrolete1 ton motor home with a 350?

Probably 1.72 intake and 1.50 exhaust, but also could be 1.94 intake and 1.50 exhaust.


How do you replace the valves in a Chevy 350 engine?

this is a mechanics job you have to remove inlet manifold,exhaust manifolds,and then remove heads to replace the valves


What is exhaust and what is intake 350 Chevy?

If you take a valve cover off, the rocker arm that lines up with an intake runner, is intake, and the ones that line up with exhjaust ports, are exhaust.


Determining which valve is the intake and exhauston Chevy 350?

Yes, children can help. Its a fun hobby for anyone. It doesn't cost very much either. http://www.newdirectionsaromatics.com/soap-supplies-soap-bases-c-6_65.html?gclid=CNvL-_7rnawCFYSK4AoduGXz1A


Will Chevy 5.0 heads and intake fit a 5.7 short block Chevy engine?

Depending on years that you are swapping around....yes. The 305 heads will raise the compression of the 350 considerably. However, the intake valves are a lot smaller than the 350.