The transfur case is hanging on the back of the transmission, The rear driveshaft comes from the rear end and goes into the transfur case.
In most cases, you will find the speed shift sensor for your 1998 Chevy Blazer located on the backside of your transfer case. The transfer case is located on the transmission.
It is bolted to the back of the transmission and then the driveshaft on the rear slides into it.
A 1996 Chevy Blazer Does have a transfer case IF it is equipped with 4 wheel drive
What's the question?
i believe its dextron 3 and you take out the top plug on the rear of the transfer case and fill it up until it runs out put in plug and your done
The transfer case is attached to the Transmission.
Remove all wires attached to the transfer case. Remove the driveshafts. Drain the fluid out of the transfer case. Place a transmission jack under the transfer case. Unbolt the transfer case from the transmission. Unbolt the crossmember the transfer case rests on.
it located right in back of the tranmission.
Replace the seals.
The transfer case is mounted to the rear of the transmission
on the top of the transmission its on the transfer case with 3 vacuum lines coming out of it.
i have a 1989 chevy blazer gos in 4x4 drive but front wheels are not pulling wat do i do about that