Look on the inside of the talegate for a panel that is screwed on. Remove the screws and you should be able to get inside.
In a 1988 Ford Bronco, the switch to roll down the back window is typically located on the driver's side door panel. It may be a toggle switch or a push-button switch, often positioned near the controls for the front windows. If the Bronco has power windows, there might also be a separate switch for the rear window on the rear door or center console, depending on the specific model configuration.
There is a control arm that attaches to you tailgate release, chance are this or another one of these arms has come out of it's retaining clip. Remove the inside panel on the tailgate, about 6 to 8 screws. This will allow you access, though tight, into the area of the motor, gears and control arms. If you have tint on your window slide a piece of cardboard in to protect from being scratched while your working in there.
Anonymous Logon
yes
To remove the rear power window on a 1991 Ford Bronco, first, disconnect the vehicle's battery to ensure safety. Remove the rear door panel by unscrewing any screws and carefully prying it off to access the window mechanism. Disconnect the wiring harness from the power window motor and remove the motor by unscrewing it from its mounting. Finally, detach the window from the regulator and lift it out of the door frame.
To replace the vent window on a 1982 Bronco, start by removing the door panel to access the window assembly. Then, carefully detach the vent window by removing the screws or bolts that secure it in place, and disconnect any weather stripping. Install the new vent window by reversing the removal process, ensuring a proper seal with new weather stripping if necessary. Finally, reattach the door panel and test the window for smooth operation.
jeff's bronco graveyard.com
No, a tailgate window from a 1984 Ford Bronco will not fit a 1994 Bronco. The design and dimensions of the tailgate and its components changed between these model years. While both are Broncos, the differences in body styles and mechanisms make the parts incompatible. It's best to source a tailgate window specifically designed for the 1994 model.
break it
To remove the rear window motor from a 1994 Ford Bronco with the window stuck down, first disconnect the vehicle's battery for safety. Then, remove the interior door panel by unscrewing any fasteners and carefully prying it off to access the window motor. Locate the motor and disconnect its wiring harness, then unbolt it from the door frame. Once unbolted, you can pull the motor out; ensure to handle any remaining components with care.
Possibly because you have your window lock on. Some cars are that way. If not that, then you probably have an electrical problem in the system. It could also be that the window are off the track. Either way, you need to take it to a mechanic.
Yes, you can manually roll up the window on a 1990 Ford Bronco if the power window mechanism is malfunctioning. You would need to access the window regulator assembly, typically by removing the door panel. Once exposed, you can either use a tool to turn the regulator manually or reattach any disconnected components to restore functionality. Always ensure safety and consult a repair manual if you're unfamiliar with the process.