Better hope it is not a drum brake- it was originally equipped with a disc brake caliper.
Drill out the rivets
Remove the positive cable from your 1975 Chevrolet Corvette battery. Remove the two cables from the front of the starter. Remove the starter retaining bolts. Reverse the process to install your new starter.
Left hand side under the brake master cyl.
unhook the vacuum cable off, unhook the bracket going from the brake boost to the brake pedal (inside the car under the dash, driver side of course) unbolt from under their also. push out and put new one in opposite this.
remove the wheel and take off the two bolt the bolt the brake caliper and the rotor should just slide off. Remember to release the e-brake before trying to slide it off, if it is hung up it's because of the e-brake shoes that are behind the rotor or is just surface rust and with a little penetrating lube and a rubber malet it will come free.
Rusty Kruger was born on 1975-03-26.
You can order it via the Eckler's Corvette website.
== ==
== ==
165 hp
Bulbs blown?
Haynes repair manual.Chev corvette 68-82($20)