* Working at the front of each seat cushion push the retaining tabs in then lift up on the front edge of the cushion and release the seat cushion retaining tabs. Remove the cushion from cushion from the vehicle * Detach the retaining bolts at the lower edge of the seat back * Lift up on the lower edge of the seat back and remove it from the car
unbolt it.
remove the bolt at the rear of the seat and remove the seat. the battery is under there
A front passenger seat on a 2005 Honda Civic is held on by four bolts. Pull the seat back to loosen the front two. Pull the seat forward to reach the two rear bolts. Remove the seat.
The rear seat is not designed to be removed. You can remove the center seat and slide the rear seat forward.
Remove the bolts fastening the rear seat cushion (Figure 7.52).Remove the rear seat cushion assembly.Remove the screws and remove the side rear seat back (Figure 7.53).Remove the lower bolts fastening the rear seat back.Tightening torque - 17-26 NmFlip forward the rear seat back, remove the bolts and remove the back seat.Tightening torque - 17-26 Nm
The rear seat isn't designed to be removed. If you have a center bench seat you can remove that by unclipping it, then slide the rear seat forward.
The rear seat is not intended to be removed. You can remove the center seat and slide the rear on forward into it's place.
How do you remove the rear seat on a 2002 diamante
To remove the rear seat of a 2005 Hyundai Santa Fe, start by locating the release levers or bolts at the base of the seat. For the bottom seat cushion, pull up on the front edge to release it from the clips and then lift it out. For the seatback, look for bolts or release mechanisms at the bottom or sides and remove them. Once detached, carefully lift the seatback out of the vehicle.
Remove rear seat and panel underneath seat. How do I remove rear seat?!?!
remove the 2 bolts on the floor in front of the seat, and the 3 bolts on the floor at the rear of the seat.
To remove the seat on a 2005 Harley-Davidson Softail, start by locating the seat release mechanism, typically found at the rear of the seat or under the seat itself. Use a socket wrench or a screwdriver to remove any bolts or screws securing the seat. Once these fasteners are removed, gently lift the seat upward from the rear and slide it forward to detach it from the mounting points. Always consult your owner's manual for specific instructions related to your model.