First you must jack up engine on right side of car. 2nd remove the motor mount bolts. 3rd loosen 15mm nuts on inner fender. Then carefully slide belt through the motor mount.
no!
How do I rethread the serpentine belt on a 2002 Malibu with a V-6?
Remove the serpentine belt and remove the alternator. The belt tensioner bolts are under the alternator.
You need to remove the serpentine belt and unbolt the old alternator. Bolt on the new one and reinstall the belt. Its that easy.
remove the belt. then in center of the tensioner is a bolt that goes into engine. remove this bolt. then tensioner should come off.
To replace the serpentine belt on a 2008 Malibu with a 3.5L engine, first, ensure the engine is off and cool. Locate the serpentine belt routing diagram, often found on the radiator support or inside the engine compartment. Using a wrench or ratchet, release tension from the serpentine belt tensioner to remove the old belt. Install the new belt following the routing diagram, ensuring it is properly seated on all pulleys, and then release the tensioner to apply tension to the new belt.
Remove serpentine belt. Remove alternator. The bolts that hold the tensioner on are under the alternator.
Just a serpentine belt. May have to remove a motor mount in order to change it, that varies by the year.
You can remove your serpentine belt by loosening the tensioner pulley. Pushed the tensioner pulley to the right and the serpentine belt can be easily removed.
it could be a serpentine belt or accessory belt.
should have 1 big belt called a serpentine belt.
replacing serpentine belt on 2000 chevy prizm need help