Push & hold "time" button until clock blinks. Then use radio controls to adjust time. Push time button to move to minutes and push again when finished.
look in your owners manual.
S
Use the set buttons.
My 2000 Dodge Durango , my clock does not have the h or the m for setting the clock! any suggestions on how to set the clock????? Turn radio on, press set, press sel, now seek should change time.
You can set the clock, on your 2005 Dodge ram, by holding in the volume button. Turning the tuning knob as the volume button is held in. The time will advance with the tuning knob.
To set the clock in a 1991 Dodge Stealth ES, first, turn on the car's ignition. Press and hold the "Clock" button until the display starts flashing. Use the "Hour" and "Minute" buttons to set the correct time, then press the "Clock" button again to save your settings. The clock should now display the updated time.
To set the clock on a 1990 Dodge Dynasty, first turn on the vehicle's ignition. Locate the clock adjustment buttons on the dashboard, typically labeled "Hour" and "Minute." Press the "Hour" button to set the hour and the "Minute" button to set the minutes. Once the correct time is displayed, the clock will retain the setting when you turn off the ignition.
The clock on the radio can be set by two buttons found to the right on the display screen. H for hour and M for minute.
To set the clock on a 2007 Dodge Caliber, turn the ignition to the "On" position without starting the engine. Press and hold the "Hour" button to adjust the hour, and the "Minute" button to set the minutes. Once the correct time is displayed, release the buttons, and the clock will automatically save the settings.
It is set to zero with a scan tool. It can not be done with a timing light.
You have to fix the cause of the code that is set in the ABS module.
To adjust the clock on a 2006 SRT8 Magnum, turn the ignition key to the "On" position without starting the engine. Press and hold the "Hour" button to set the hour, then press the "Minute" button to set the minutes. Once you have made the adjustments, simply turn off the ignition to save the settings.