0
In a 97-03, the bulbs are soldered into the circuit board of the heater controls. Remove the heater control assembly and disassemble it to the board. Desolder the bulbs and replace with new ones from either radio shack or corvetteradios.com. The bulbs are 12v but I don't know the wattage. CorvetteRadios has bulbs for the CD player as well which are similarly soldered into the circuit board on the face plate.
What else can I help you with?
How do you change bulbs behind heater dials on 306?
pull the front facia off the heater dials then you find a white box which is to operate the heater dials remove the front from there which is clipped on then there are your bulbs
Where to purchase 2000 silverado colored daylight running light bulbs?
http://superbrightleds.com/
1999 Chevy silverado brake lights don't work have replaced fuse and switch on pedal?
Check the bulbs,if not the bulbs you most likely have a bad ground.
2001 Chevy silverado tag bulbs are new but they do not light up what seems to be the problem?
These kind of bulbs only light up around Christmas time.
How do you change the left running light on a 2002 silverado?
Remove the headlight assembly to gain access to the bulbs.
Headlights not working on a 2006 Chevy silverado all other lights work?
Check the bulbs and check the fuses.
How do you change the left running light on a 2002 silverado 1500?
Remove the headlight assembly to gain access to the bulbs.
How do you change lights behind dash on 2003 silverado?
The bulbs are actually soldered into the circuit board. The only way to change them is to dismantle the whole cluster and desolder then re-solder the bulbs.
How do you replace Audi A3 heater control switch bulbs?
To replace the heater control switch bulbs in an Audi A3, first, disconnect the vehicle's battery to ensure safety. Remove the trim surrounding the heater control panel, typically using a trim removal tool. Once the panel is exposed, carefully detach the control switch assembly to access the bulbs. Replace the old bulbs with new ones, reassemble the switch and trim, and reconnect the battery to complete the process.
How do you change the light bulb for the heater control on a 2006 Tahoe?
To change the light bulb for the heater control on the 2006 Tahoe, you will either need to replace the entire climate control panel or remove and re-solder the bulbs. You can remove the bulbs by first removing the dashboard bezel and then the dash itself. Access the bulbs and pull them out of the control panel. Solder new bulbs into the panel.?æ
How can one change the headlamp bulbs on a 2003 Chevy silverado?
there is two rods that go through the housing from the top. turn them to unlock and pull up and out then the whole assembly comes out and you can change the bulbs.
How do you replace light bulbs for heater controls on 2011 Renault traffic?
To replace the light bulbs for the heater controls on a 2011 Renault Trafic, first, ensure the vehicle is turned off and the keys are removed. Carefully remove the surrounding trim or panel to access the heater control unit. Unscrew or unclip the heater control assembly, then replace the burnt-out bulbs by twisting them out and inserting new ones. Reassemble the unit and trim, ensuring everything is securely in place before testing the new lights.
