0
What else can I help you with?
Can you use a rubber line to splice into a transmission line?
Make sure you use rubber fuel line
Is the fuel hose made of rubber in a Jeep liberty diesel?
Some sections of the fuel lines are rubber.Some sections of the fuel lines are rubber.
Can you use rubber fuel lines to replace your brake lines?
You can not use rubber fuel lines to replace the current brake lines due to the high operating pressure. You will need to replace them with brake lines, the rubber brake lines has a different construction to hold the pressure and not getting eaten away by the brake fluid, brake lines can hold over 2000psi when the pedal is heavily applied
Will benzine break down rubber fuel lines?
Yes, benzene can break down rubber fuel lines. Rubber is often susceptible to degradation when exposed to certain chemicals, including aromatic hydrocarbons like benzene. Prolonged contact can lead to swelling, cracking, or complete failure of the rubber material, compromising the integrity of the fuel system. It's essential to use fuel lines specifically designed to resist such solvents to ensure safety and durability.
What happens if you replace metal fuel lines with rubber?
it can be done with only fuel hose. i have done it when fuel lines have needed spliced or a few feet needed replacing. never had a problem after that either. auto parts sell it by the foot. very affordable Not knowing what vehicle you have, be careful, some fuel systems require more than 60 psi. Some aftermarket rubber fuel lines may not handle that pressure.
Should there be a rubber o-ring on the inlet and outlet fuel lines connected to the fuel filter on a 1999 Chevy silverado 5.3L?
NO, they are flared
Which way do fuel hoses go on the fuel pump?
The larger diameter neck out of the fuel pump is the pressure output and goes to the line that goes to the fuel filter. The other one is the low pressure return line, which is fuel returning to the fuel tank from the fuel injector rail. This question is making wonder, because the quick connect fittings on the end of the lines, are different sizes, and can't be crossed up. I am sincerely hoping that the OEM lines are still present, and we are not trying to clamp bulk rubber lines onto the system. Because clamping rubber lines in place of the OEM lines, is asking for a serious explosion.
How do fuel lines work 1999 savanna?
In a 1999 GMC Savanna, fuel lines transport gasoline from the fuel tank to the engine. The fuel pump draws fuel from the tank and pushes it through the lines, which are typically made of metal or reinforced rubber, to the fuel injectors or carburetor. The system is pressurized to ensure a steady flow of fuel, and it includes filters to remove contaminants. Proper functioning of the fuel lines is crucial for engine performance and efficiency.
1987 Chevy Celebrity has no fuel pressure?
Check the fuel pump fuse and relay. Check to see if the fuel pump has failed. Check the fuel filter to see if it is clogged. Check the fuel lines for leakage, especially rubber flexible lines. Check the fuel line for blockage or crimps.
Where is the fuel line on a 2001 Honda 300ex?
The fuel lines on a 2001 Honda 300ex run from the fuel tank, along the vehicle's frame, to the carburetor. It is made of a fuel resistant rubber material.
Can you run e-85 in your 1997 dodge ram?
No, the ethanol will "eat" the rubber in the fuel lines, pump, and seals.
What material is in a fuel line?
Fuel lines are typically made of flexible materials such as rubber, nylon, or stainless steel to withstand the pressure and flow of the fuel. These materials are chosen for their durability and resistance to corrosion from the fuel and environment.
