do you have a diagram for pontiac grand am 2005 thermostat
At the point where the upper radiator hose clamps to the engine is the thermostat housing. Inside is the thermostat.
To replace the thermostat on a 1997 Pontiac Grand Am 3.1, first disconnect the negative battery terminal and loosen the clamp on the radiator hose. Next, remove the mounting bolts from the thermostat housing and insert the new thermostat.
Is the engine a 3.1? If so it is easist to remove the crossover pipe, then the thermostat housing.
To install a thermostat in a 2001 Pontiac Grand Am, first, ensure the engine is cool and disconnect the negative battery terminal. Drain the coolant from the radiator, then locate the thermostat housing, which is typically near the engine block. Remove the housing by unscrewing the bolts, take out the old thermostat, and clean the surface. Insert the new thermostat with the correct orientation, reattach the housing, refill the coolant, and reconnect the battery.
INSIDE A HOUSING ON THE ENGINE END OF THE TOP RADIATOR HOSE.
Follow the upper raditor hose from the raditor to the motor, the raditor hose is connected to the thermostat housing, take the houseing off, the thermostat is under the housing.
To change the thermostat on a 2002 Pontiac Grand Am with a 2.2L engine, first, ensure the engine is cool and disconnect the negative battery cable. Drain the coolant from the radiator, then remove the upper radiator hose from the thermostat housing. Unscrew the thermostat housing, replace the old thermostat with a new one (making sure to orient it correctly), and reassemble the housing and hose. Refill the coolant, reconnect the battery, and check for leaks.
Follow the upper radiator hose back to the engine. It should be connected to the thermostat housing. The thermostat is under there.Take Care,Greg
Inside the thermostat housing, follow the upper rad hose back to the engine, under the throttle body.
To change the thermostat in a 1996 Pontiac Grand Am, first, ensure the engine is cool and disconnect the negative battery cable. Drain the coolant from the radiator, then locate the thermostat housing, which is typically near the engine's upper radiator hose. Remove the housing bolts, take out the old thermostat, and clean the mating surfaces before installing the new thermostat with the correct orientation. Finally, reassemble the housing, refill the coolant, and reconnect the battery cable.
where can you find a diagram of 1994 pontiac grand am motor?