0
What else can I help you with?
To what torque must the bolts on the head of a 1996 Hyundai Accent be tightened?
You can give your local NAPA a call, they should print out all the torque specs for your car or just give it to you over the phone. At least they do in VA.
What is torque pressure for the valve cover bolts on a 1998 Hyundai Accent?
72in-lbs
Torque specs for 1999 Hyundai accent's valve cover?
The torque specs on the valve cover bolts on a 1999 Hyundai accent are 71 to 89 INCH pounds or 8-10 N.m.
Which way do you turn a crankshaft bolt on a 1999 Hyundai accent?
To loosen the crankshaft bolt on a 1999 Hyundai Accent, you should turn it counterclockwise. Typically, crankshaft bolts are tightened to a high torque, so using a breaker bar may be necessary for additional leverage. Always ensure the engine is properly secured and consider using a flywheel or crankshaft locking tool to prevent rotation while you work.
What is the torque setting for a 2001 Hyundai Elantra oil pan bolts?
The 2001 Hyundai Elantra oil pan bolts torque should be 84-108 in-lbs
How do you replace the wheel bolts on a 2004 Hyundai accent?
if the bolts do not get on then you just have to change the studs
What is the torque for caliper bolts on a 2013 Hyundai Tucson?
The torque specification for the caliper bolts on a 2013 Hyundai Tucson is typically around 25-30 lb-ft (33-41 Nm). It's important to consult the vehicle's service manual for the exact torque values, as they may vary slightly based on specific configurations or updates. Always ensure that bolts are tightened in a crisscross pattern for even distribution and to avoid warping the brake components.
What is the head torque on a 2001 Hyundai elantra?
10mm bolts torque to 18 Ft-lbs 12mm bolts torque to 22 Ft-lbs
How do you remove the back seat in a 2002 Hyundai accent?
To remove the 2002 Hyundai accent rear seats find the tabs that cover the bolts and unbolt them. After the bolts are out lift the seat to remove it from the car.
What is the torque specs for a 2012 hyundai accent?
The torque specifications for a 2012 Hyundai Accent can vary based on the specific component being addressed. For example, the cylinder head bolts typically require a torque of around 65-75 ft-lbs, while the wheel lug nuts are generally torqued to about 80-100 ft-lbs. It's always best to refer to the vehicle's service manual for the most accurate and specific torque settings for each component.
At what torque must the Intake Manifold Bolts be tightened to on a Honda passport 97?
18 ft lbs
What is the torque for cylinder head bolts on a Skoda favorite 1995?
According the the Haynes Manual (No. 1801, Skoda Favorit 1989-1996) the bolts should be tightened to between 17 and 20 Nm. Once all are tightened to this torque they should then be tightened a quarter turn each, and then another quarter turn each. The manual also quotes a torque of 20-23Nm for the cylinder head nuts.
