There is a service bulletin out on this problem (NUMBER: 21-015-05, GROUP: Transmission, DATE: September 01, 2005). It seems that fluid will drain from the torque converter after the vehicle sets awhile causing the slow to engage problem. According to Dodge, while it causes customer concern, it is not detrimental to the transmission. There is a new version of a transmission cooler filter which when installed mitigates the problem.
Low fluid level if your lucky.
dirty tranny fluid
The slow gear shift in your 1995 Volvo 940 Turbo Wagon when it's cold could be due to several factors, including low transmission fluid levels, worn transmission fluid, or a failing transmission control module. Cold temperatures can thicken the transmission fluid, making it harder for the transmission to engage properly. It's advisable to check the transmission fluid level and condition; if the fluid is low or dirty, a change may help. If the problem persists, consider having the transmission inspected by a professional to diagnose any underlying issues.
Slipping , slow to move, won't move, shudder, chatter, all are damaging to transmission.
My V10 2001 Dodge slow shifting was solved by replacing the catalytic converters. The ECU was detecting load/stress, like pulling a trailer up a hill. So it signaled to the transmission to not shift up to the next gear. After CAT replacement the shifting was fine. For me this was NOT a transmission issue.
Same place you check it. Use a funnel with a long tube and pour slow for best results.
The transmission will not engage fully,,,the spin cycle may be slow or start off slow OR may not even start is there are too many clothes in the load. The wash cycle may not agitate.
slow to start from cold and starts when warm
Get the slow motion power-up
Possibly partially clogged filter. I would suggest you have the fluid and filter changed. If this does not help, time to visita professional transmission tech. Do not flush the system if it has been neglected and not serviced every 36,000 miles. Just drain and refill.
balls. balls will slow shafting
Hot air is less dense so there are less interactions to slow the transmission, and less 'inertia' of particles.