You can find wiring schematics at autozone.com.
could be a fuse, wiper switch ,wiper motor or wiring
Check in this order: Fuse, Switch, Motor, Wiring.
wiring diagramfor 1968 windshield wiper motor
If the wiper motor won't shut off, it could be due to a faulty wiper switch, a stuck relay, or an electrical short in the wiring. Check the wiper switch and relay for any signs of damage or malfunction. Additionally, inspect the wiring for any shorts or corrosion that may be causing the motor to remain powered. If these components are functioning properly, the issue may lie within the motor itself, which may require replacement.
To replace the windshield wiper motor in a 1994 Ford Escort, first disconnect the battery and remove the wiper arms by loosening the nuts at their bases. Then, detach the wiper motor by removing the screws or bolts that secure it to the firewall and disconnect the wiring harness. For the wiper switch, access the steering column by removing the cover and disconnect the switch from the wiring harness. Install the new components by reversing these steps, ensuring all connections are secure before reconnecting the battery.
Remove the wiper arm from the wiper motor. Remove the wiring harness from the wiper motor. Remove the wiper motor retaining bolts. Reverse the process to install the new wiper motor.
full wiper system wiring diagram
Remove the wiring harness from the wiper motor. Remove the windshield wiper arm from the wiper motor. Remove the wiper motor retaining screws. Reverse the process to install the new wiper motor.
The wiper motor on a 1992 Chrysler LeBaron won't work if the motor has seized up or the fuse has blown. The switch inside the cabin or the wiring can also come loose and cause this problem.
Remove the wiper arm from the wiper motor. Remove the wiring harness. Remove the wiper motor retaining bolts. Reverse the process to install the new wiper motor.
Wiper arm travel rod from the wiper motor. Remove the wiper motor wiring harness. Remove the wiper motor retaining bolts. Reverse the process to install the new wiper motor.
check the fuses, wiring connectors, switch, exc.