The ABS will not function if needed and the ABS light will remain illuminated.
In a 1992 Volvo 940, the ABS fuse is located in the fuse box under the dashboard on the driver's side. You can find the fuse box by removing the cover, and the ABS fuse is typically labeled in the diagram on the inside of the cover. It is usually a 15A fuse, but always check the owner's manual for the specific fuse number and rating. If you're having issues with the ABS system, it's a good idea to inspect this fuse first.
In a 1995 Ford F-150, the ABS fuse is typically located in the fuse box under the dashboard on the driver's side. You can access the fuse box by removing the cover, and the ABS fuse is usually labeled in the diagram on the cover or in the owner's manual. If you're having trouble, check for a fuse labeled specifically for the ABS system. Always ensure the vehicle is turned off before inspecting fuses.
Removing the ABS fuse can be very dangerous. With the antilock braking system not working, if you apply the brake pedal you run a risk of the tires locking up, causing the car to skid dangerously.
Not sure about a recall, but to temporarily deactivate it, you can pull the ABS fuse, which should be located under the hood.
ABS fuse is located in the engine compartments fuse block, the owners manual ussually lets you know where the fuse is and the amperage.
the abs fuse is under the hood on driver side
Pull the ABS fuse located in the under hood fuse box. Pull the ABS fuse located in the under hood fuse box.
Which fuse box location does the abs fuse has on a 2000 Chevy Monte Carlo SS
The 1994 Chevrolet Astro Van ABS fuse is located in the fuse box. The ABS fuse will be in the second column, third from the top.
fuse abs pontiac aztek 2002 located
Remove the abs fuse under the hood in the fuse box
AnswerABS stands for Antilock Brake System. If the light stays on, then there is a problem with the ABS system. You will have normal braking but the ABS will not function. Check the 60 amp fuse in the fuse box. If missing or blown, the ABS light will be lit on the dash panel.If the fuse is missing, it disables the anti-lock feature of the braking system. If the brakes are otherwise in working order, you will still be able to brake. ABS can be disabled this way if the ABS module is causing braking problems or if you just hate the way ABS feels. Note that a sticky front brake caliper can cause the ABS to activate at the wrong time, releasing the brakes when you wish to stop. :-o I had the fuse removed from the fuse box for this reason until the caliper was replaced.If the fuse is blown, you will probably want to find out why. A brake specialist or auto electrician may be needed.