The torque settings for the transmission pan bolts on a 1998 Pontiac Transport typically range from 10 to 12 lb-ft (pound-feet). It's essential to follow a crisscross pattern when tightening to ensure even pressure and prevent leaks. Always consult the vehicle's service manual for the most accurate specifications and any specific procedures related to your model.
there are 5 the bottom pan the side pan the 2 cv axle ports and the seal behind the torque converter
115in-ibs
Another post said it was on the front of the transmission towards the radiator.
The 1997 Pontiac Transport 3400 rocker arm torque specifications are 18 pounds. The rocker arm should be torqued in six pound intervals.
Torque settings for the 11 screws that secure the transmission cover on an 08 sportster
Think of the torque converter as being the clutch between the engine and transmission.
The automatic has one for the lock up torque converter
14 to 18 lbs/ft.
If your dipstick reads "Full", then you do not need to add any fluid. Be certain to follow manufacturer instructions when checking fluid level. Your torque converter is part of the transmission, when speaking of fluid, so if the transmission is full, the torque converter is also.
torque converter solenoid not functioning/locking up.
It is attached to the valve body inside of the transmission.
Bell housing bolts and the torque converter bolts.