0
The ABS Disable light may come on for a number of reasons. I started having issues after driving on wet roads. The source of the problem with my Rendezvous was related to corrosion of connectors, primarily at the two wire bundle connections under the front wheel wells - which cost over $700 to replace/repair. Repair shop told me that it's a common problem with Rendezvous and is primarily due to a poor design. Other issues I've had with my car have all been electrical - Thanks Buick!
BBaaspencer here..mine was caused by a bad hub bearing and a bad abs wiring harness.
What else can I help you with?
What would cause a Buick rendezvous to just cut off?
Being a GM product I would suspect the fuel pump is bad.
What would cause Buick Rendezvous overheating?
It could be multiple problems. check your coolant level, it could also be your Lower intake gasket or even a head gasket.
What would cause the power windows not to work in your buick rendezvous?
Several factors could cause the power windows to stop working in a Buick Rendezvous. Common issues include a blown fuse, a malfunctioning window switch, or a faulty window motor. Additionally, wiring problems or a defective body control module could also be contributing factors. It's advisable to check the fuse first and then inspect the switches and wiring if the fuse is intact.
What would cause your buick rendezvous to sound like a siren or low hum idling or after turning car off?
I have the same problem... was told it is a vacuum leak, possible around the PVC valve.
What can cause slow acceleration in 2005 Buick rendezvous?
Slow acceleration in a 2005 Buick Rendezvous can be caused by several factors, including issues with the fuel system, such as a clogged fuel filter or failing fuel pump, which can restrict fuel flow to the engine. Additionally, problems with the ignition system, like worn spark plugs or faulty ignition coils, can lead to poor engine performance. Transmission issues, such as low fluid levels or slipping gears, may also contribute to sluggish acceleration. Lastly, a malfunctioning throttle position sensor or dirty air filter can affect engine responsiveness.
What is the part on the back wheels of a 2003 Buick Rendezvous that's makes the rear tires wear?
The component on the back wheels of a 2003 Buick Rendezvous that can cause rear tire wear is likely the rear suspension system, specifically the rear wheel alignment, including camber and toe settings. If these settings are off, it can lead to uneven tire wear. Additionally, worn-out suspension components, such as bushings or shocks, can also contribute to improper tire contact with the road, exacerbating wear issues. Regular maintenance and alignment checks can help prevent these problems.
Would the crank fuse cause your rendezvous not to start?
yes.
What does it mean when service stability system light comes on in 2003 Buick Lasabre?
The computer has detected a malfunction in the stability system. You will need to have the system checked for trouble codes. You can then diagnose for the possible cause.
How do you disable the alarm system on a 2001 Toyota Celica?
how do i disable the alarm on my 2001 toyota celica my key fob broke in half and i disabled the horn so it doesn't make noise cause the alarm goes off every second but how do u disarm the alarm cause also the car will not start without the alarm disabled
2002 Buick lesabre crank dont start?
what can cause a 2002 buick lesabre to not crank
What would cause a transmission of a1992 Buick lesebre to shrudder as the engine shuts down?
what will cause a transmission in a 1992 buick lasebre to shrudderas and stall engine
How do I fix a 2001 Buick anti brake light and trac light and brake light coming on when i start and run the car?
These lights are probably all related. When there is a problem in the ABS system, this will disable the TRACTION system, which will inturn illumiinate the Service Vehicle Soon light. A common cause for this is there is a problem in the ABS. A faulty wheel speed senor or the harness to the sensor may be faulty. When the ABS computer (EBCM) sees a problem in the ABS, it can cause all these lights to come on. A scan of the ABS computer would be the first thing needed. Then, diagnosis of the system / circuit that is at fault would be needed. Tech JK -----------------------------------------------
