answersLogoWhite

0

Red is used for a swithced positive circuit. Yellow is used for a constant positive circuit. Black is used for ground.

User Avatar

Wiki User

14y ago

What else can I help you with?

Related Questions

How do you hook up a pioneer deh-p2500?

I lost the wiring colors codes but it's fairly easy. The key is to find out what the color codes are for the vehicle your connecting the radio to. After that, yellow and red wires on the 2500 are your positive and negative, and the remaining wires are Speaker wires - FRONT Left, FRONT Right, REAR Left, REAR right. Once your power wires are connected just connect speakers to each set of matching color wires and mark which speaker comes on.


How do you hook up a pioneer deh p2500?

I lost the wiring colors codes but it's fairly easy. The key is to find out what the color codes are for the vehicle your connecting the radio to. After that, yellow and red wires on the 2500 are your positive and negative, and the remaining wires are Speaker wires - FRONT Left, FRONT Right, REAR Left, REAR right. Once your power wires are connected just connect speakers to each set of matching color wires and mark which speaker comes on.


How do you get the rear speakers to work on a 2000 Alero?

hook the speaker wires up to them and turn the volume up.


Can a rear parking light fixture be replaced without replacing the rear bumper?

yes it can!! go under your car to wear you see the wires to the light and undo the wires and take the light out then put and wire a new light fixture


What are the rear right and rear left positive and negative speaker wire colors for a 2001 Saturn L200?

Every place I've looked has false info for what color wires are in the door itself! It's said that there are yellow and brown wires, not true..... the rear right positive is dark blue, and the rear left positive is light blue.


What wires do you hook up for the front and rear stereo speakers in a 1997 Mitsubishi Eclipse RS?

you match them with the same colors


How do you wire up a trailer to your mark 3 golf as you have no wiring diagram of your golfs rear lights?

you just have to find the right wires for example the brake light positive wire the right and left turn signal positive wires and the parking light positive wires then splice into them find a good common ground hook all of them up to your trailer plug and you are set. GOOD LUCK... if you do not already have one go fet a 12 volt test light and this will help you identify the positive wires you can splice in to the wires right t the light bulbs


How do you hook subs up to your factory stereo?

Use a line out converter spliced into the rear speaker wires to connect RCAs to a sub amp.


What is the wiring color code for speakers wires in a 1999 Yukon Denali?

Front Speakers6 1/2" DoorsLeft Front (+)Tan Left Front (-)Gray Right Front (+)Light Green Right Front (-)Dark Green Rear Speakers6 1/2" Rear DoorsLeft Rear (+)Brown Left Rear (-)Yellow Right Rear (+)Dark Blue Right Rear (-)Light Blue hope this helps


How do you gain access to the rear speakers in a 1997 Chevy silverado xcab Can you splice into the speaker wires elswhere?

on drivers side rear pull the storage bucket out of the back seat and the speaker wires and the cab light wires run through there


What are the car stereo wiring color codes for a 1998 Suzuki esteem?

The wiring color code for a 1998 Suzuki Esteem is easy to follow, and the wires are easy to identify. The radio battery constant 12 volt + wire is white, the accessory switched 12 volt + wire is white/black, the ground wire is black, and the illumination wire is red/yellow. For the speakers, the front left speaker wires (+,-) are black/orange and orange, and the right front speaker wires (+,-) are red/black and red. For the rear speakers, the rear left speakers (+,-) are light green/black and light green, and the right rear speakers (+,-) are gray/red and red.


Why do the rear speakers not work at night?

Hey Michael==Either you have a loose connection or more likely the speaker wires run aloung the light wires and the inductanc of the light wires are producing vootage on the speaker wires. Try it at night withourt the lights on. GoodluckJoe