answersLogoWhite

0

P0300 Diagnostic Code - Random Misfire

Symptoms.
Engine may stumble or miss
Engine may be hard to start
you may notice no issues

Cause
Failing spark plugs or spark plug wires
Bad coil or coil pack
Failing oxygen sensor(s)
Bad fuel injector or more than one
Stuck exhaust valve
Bad catalytic converter
EGR valve or valve passage clogging
Bad camshaft position sensor
Bad PCM or ECM

The Fix
Best first action is a tune up, new plugs, wires, inspect all hoses and wire connections then reset the code. If it returns you will need to narrow it down to a system, coils and coil packs should be tested, catalytic converters for function ( do you smell rotten eggs?). A misfire that jumps cylinders could indicate a lean condition, do you have any other codes along with the 300? this will help clue you in to the source, check valve function to make sure they are opening and closing fully.
This is probably pone of the most difficult codes to troubleshoot, so start with the basics and work your way into the more expensive options, in many cases a good old tune up solves the problem, back it up with a fuel system cleaning and see where you stand.

User Avatar

Wiki User

10y ago

What else can I help you with?

Related Questions

What is the cause of a p305 code on a 2000 Chevy Malibu?

cylinder 5 missfire detected. could be plug, wire, or bad coil...


What would cause a 97 Chevy 350 vortec to have a miss fire in cylinder 7 other than a bad plug and a good cap and rotor?

A bad fuel injector poppet could cause that.


2002 Chevy trailblazer check engine light on miss fires real bad and cruise don't work what could it be?

you neede to have the pcm scanned it will tell you which cylinder is misfiring. most prob. cause is the coil pack on that cylinder.


What does service code P0300 mean on a 1998 Plymouth Grand Voyager?

P0300 = random misfire. Could be as simple as needing a tune up.


What would cause coolant to get in 1 cylinder?

a leak in a head gasket could cause coolant to go into only one cylinder.


Will a catalytic coverter make the engine missfire?

If the cat was damaged and restricting the exhaust it could cause a random misfire (P0300) but you would also have a severe loss of power.


Does a Chevy Blazer have a 4 cylinder motor?

It could have, Just count the spark plugs. 4 plugs= 4 cylinder 6 plugs= 6 cylinder 8 plugs= 8 cylinder


What could be the problem if you get an obd2 code of po307 cylinder 7 misfire detected on a 2000 Chevy silverado?

this could be a bad plugwire or sparkplug or a bad coil for cylinder 7.


Why does only one cylinder have no compression on my Chevy 355?

The lack of compression in one cylinder of a Chevy 355 engine could be caused by a number of issues such as a leaking valve, a blown head gasket, a cracked piston, or improper sealing of the piston rings. It is recommended to perform a compression test and further diagnostic tests to identify the exact cause of the low compression in that cylinder.


1991 Chevy s10 2.5 4-cylinder there is no spark at plugs whats can it be?

this could be a coil or the modgul in the dist or broken rotor or bad coil packs depending on what u have also the knock senser could cause this hope this helps


What is the usual cause of the number one cylinder lifters to be tapping in a Chevy small block 305?

Could be, Out of adjustment Worn camshaft Worn lifters Worn pushrods Worn rockers All of the above.


Can a flashing engine light indicate a bad fuel filter?

Anything that could cause a cylinder misfire can cause the check engine light to flash. A restricted fuel filter is one.Anything that could cause a cylinder misfire can cause the check engine light to flash. A restricted fuel filter is one.