that year had the jet engine option
i had that problem with mine. the problem was an intake vaccuum leak. the engine wasnt getting enough air sucked in at idle and stalling out.
There are a few symptoms when a car has a bad cam sensor. A few of these are sputtering, poor acceleration, and the engine stalling.
A deceleration valve is a device that controls the rate at which an engine returns to idle speed after the throttle is released. It helps prevent stalling and contributes to smoother engine operation during transitions from acceleration to deceleration.
It is important to know the symptoms of a bad car part. The symptoms of a bad crank sensor is acceleration problems, engine sputtering and engine stalling.
Well, first you have to figure out WHY it's stalling.
will 2001 2.2 cavalier interchange engine parts with a 2000 cavalier
Defective or malfunctioning Accelerator pump, idle mixture too lean, loss of vacuum in the carb during crossover from idle to the main jet operation from vacuum leaks
The 98 Cavalier 2.4 is a NON interference engine.
I replaced my 1995 S10 2.2 engine with a 2.2 cavalier engine and it worked fine.
Why are ets and engine light on in 98 Chevy cavalier
Not really, the engine has little mass and will just stop. Stalling will stretch primary and drive chains perhaps and could put excessive strain on the transmission.