my 96 dodge Dakota wont idle when engine is warm and i changed idle air controle valve what else could be wrong
It is integral to the idle stepper motor.It is integral to the idle stepper motor.
It is not adjustable.It is not adjustable.
need vacuum system diamram for a 1989 3.9 dodge Dakota p.u.
Idle speed on a 2000 Dodge Dakota is computer controlled and is not adjustable. If the speed is incorrect there is a mechanical or sensor malfunction.
could be the throttle cable is stuck or the idle air control valve is not working causing your car to idle high so when is gear would make the car speed up
The proper idle speed for a Dodge with a 318 cubic inch engine about 475 to 500 RPMs. Any idle below that will cause stalling.
Minimum of 10 psi at idle, 20-30 at idle is average.Minimum of 10 psi at idle, 20-30 at idle is average.
A lack of fuel. Can cause your vehicle not to idle. A dirty fuel filter can cause the same problem. The fuel injection pump can also cause your vehicle to not idle properly.
Check the Idle Air Control. It might need cleaning. Check the Throttle Position Sensor. It might need adjustment or replacement.
It will overheat at idle.It will overheat at idle.
One possible cause for a 1995 Dodge Avenger stalling when shifted into reverse could be a faulty idle air control valve. This component is responsible for regulating the engine's idle speed, so if it is malfunctioning, the engine could stall when the transmission is engaged in reverse. It is recommended to have the idle air control valve inspected and potentially replaced to address this issue.