0
What else can I help you with?
How do you adjust a clutch on a 2004 Chevy silverado 1500?
You CAN"T. If you are having clutch problems then it is time for aNEW clutch kit and clutch slave cylinder too. NO ADJUSTMENT
How do you remove an AC compressor clutch on Chevy silverado?
How do i remove an air compresser in a GMC Cheyene
How do you adjust your clutch on a 1991 Chevy Silverado?
There is no adjustment on that year. You either have a worn out clutch disc or a bad clutch slave cylinder. Could be a bad clutch master cylinder too.
How do you remove the fan clutch on a 2004 silverado?
The clutch fan on a 2004 Chevy Silverado is removed by loosening the alternator bracket and pulling the drive belt. The fan's retaining bolts can then be removed and pulled from the engine.
How do you adjust 2005 Chevy Silverado clutch?
That year is NOT ajustable. It sounds like it is TIME for a NEW clutch. It may just be the clutch slave cylinder too. Check it first.
What causes the clutch on a 1995 Chevy Silverado 4X4 to still be out after the clutch line was replaced?
bad clutch, bad pressure plate, throw out bearing, air in the hydraulic lines...etc
What needs to be changed besides checking the fuse in Chevy Silverado in order to get the ac compressor clutch to come on?
There is a pressure switch that runs the clutch. If there is not enough freon in the system the switch will never allow the clutch to turn on.
What size is the nut on a 2000 Chevy Silverado clutch fan?
The nut on a 2000 Chevy Silverado clutch fan typically has a size of 36mm. However, it's important to verify this with your specific vehicle model, as variations can exist based on the engine type. When working on it, make sure to use the correct tools and follow safety precautions.
Where is AC clutch relay located on 1994 Chevy Silverado?
above the a/c and heater housing, behind the glove box , right side dash
How do you change 2002 Chevy Silverado ac clutch?
To change the AC clutch on a 2002 Chevy Silverado, first disconnect the negative battery cable and remove the serpentine belt. Then, detach the AC compressor from its mounting brackets and disconnect the electrical connector to the clutch. Use a puller tool to remove the old clutch, and install the new one by reversing the steps, ensuring everything is securely reattached before reconnecting the battery and testing the AC system.
Is there a clutch pack that could be slipping in your 1999 Chevy 2500 silverado in the transfer case model np246?
NO, Not in the transfur case. Transmission YES
Have to pull the tans to get to the slave in 1995 Chevy silverado truck?
You have to remove the transmission to get to the clutch slave cylinder on that truck. You can pull the engine if you want and get to it. YOUR CHOICE.
