The 1993 Chrysler LeBaron features a classic mid-sized design with a sleek, aerodynamic shape, characterized by its rounded edges and a distinct front grille. The car often comes as a two-door coupe or a four-door sedan, showcasing a soft-top convertible option as well. Its body typically has smooth lines, with a slightly elongated hood and a compact rear, giving it a stylish, yet understated appearance typical of early '90s vehicles. Inside, it offers a comfortable cabin with a focus on ease of use and practicality.
I have the same issue. I would look at the over drive sensor/module as the culprit
look online for TSB reports.. theres loads for the 87 - 95 series
Chilten's repair book or Haynes' repair book for Chrysler 95 lebaron Usuallya 95 Chrysler lebaron is 3.0L Look in the book for diagrams for 3.0L or the engine you have To find your engine Look under hood Your engine should be on top engine cover My guess is it is a3.0L
Look at the bottom or rear of the radiator
Go to your public library and look it up on ALLDATA. This is much better than Mitchell on demand. Copies are typically 15cents.
You will find it (the PVC valve) in the same place as you would on a 1995 Lebaron 3.0. I own a 1990 Chrysler lebaron 3.0 v6 and found the PVC valve in the same spot. Look up where to find the PVC valve on a 1995 lebaron 3.0 on this site. Best of luck.
no boot for 93 is 90-95 look on eBay orchrysler parts for 89 Of course it fits, without any restriction, all boots are the same from 1987 up to 1995, but Chrysler uses other part numbers!
look on the inside of cover or lid .It should have diagram .If not ,there is a diagram in owner's manaul
passengerside under the back seat . Look on the outside of the body. Not in the passenger space compartment.
The best advice is to look in a chilton's book for 1995 Chrysler lebaron 3.0L There are Chilton's and Haynes repair manuals at your local library and auto parts store
The starter on a 1984 Chrysler LeBaron with a 2.2L engine is located on the passenger side of the engine, near the transmission bell housing. It is positioned underneath the vehicle, typically requiring access from beneath to remove or replace it. Look for a cylindrical component with electrical connections and mounting bolts.
The OBD (On-Board Diagnostics) connection for a 1986 Chrysler LeBaron is typically located under the dashboard, near the driver's side, close to the steering column. It may be found above the brake pedal or near the fuse box. Depending on the specific model, it might look like a 6-pin or 12-pin connector. For accurate diagnostics, consult the vehicle's service manual for specific details.