It is used to connect microphone to microphone preamplifiers.
It is a microphone cable
the male end of an xlr cable is the end without pins sticking out, should have three holes inside and a push switch to unlock when the plu is inside microphone or other device.
It's also called XLR. If it has pins, it's XLR male, if it has holes, it's XLR female.
Male XLR connectors have pins or prongs that plug into a female XLR connector, which have corresponding holes or slots to receive the pins. Male connectors are typically used on microphone cables, while female connectors are found on audio equipment like mixers and amplifiers.
It is a XLR microphone connector that has holes instead of pins
To connect a microphone with an XLR output to an amplifier using an XLR to amp cable, simply plug one end of the XLR cable into the microphone and the other end into the amplifier. Make sure both devices are powered on and adjust the volume levels as needed for clear sound output.
To connect an XLR microphone to your audio interface, you will need an XLR cable. Plug one end of the XLR cable into the microphone and the other end into the XLR input on your audio interface. Make sure to turn on phantom power if your microphone requires it. Adjust the input levels on your audio interface and computer settings to ensure proper recording levels.
well if your connecting it to a computer u might just wanna try an xlr male to xlr female cable as your input, and a xlr male to 3.5mm jack (mini jack) to your computers audio interface...
From a music store.
Search for XLR splitter
To connect a microphone with an XLR output to a device with a 1/4 inch input using an XLR to 1/4 mic cable, simply plug the XLR end of the cable into the microphone and the 1/4 inch end into the device's input. Make sure both ends are securely connected for optimal sound quality.
The better microphones use XLR-plugs as connection.