Lamp Flash Code 19 means that the RCM Crash Data Memory is full. In other words, at some time in the past, the airbags have deployed and the record of the event is recorded in the Restraints Control Module. The troubleshooting procedure says that the RCM must be replaced to clear LFC 19.
The Airbag Code 36 for a 2001 Ford Taurus is the airbag code for the Driver Side, Side Airbag. This means that there is either a faulty connection, and wires may need to be cleaned, or that the driver side, side airbag needs to be replaced.
There is no code 91. The codes start at 12 and stop at 53.
Airbag code 19 for a 2006 Ford Taurus typically indicates a fault with the driver's side airbag circuit. This code can be triggered by issues such as a malfunctioning airbag module, a problem with the airbag connector, or a fault in the wiring. It's important to diagnose and repair the issue promptly, as it can affect airbag deployment during a collision. A professional technician should be consulted for accurate troubleshooting and repairs.
LH Primary Sensor feed/return circuit open.
i have the same problem did you get the answer to fix it
My list shows : ( 42 ) L H radiator primary crash sensor feed / return circuit open
Code B1222 for a 2002 Pontiac Grand Am typically indicates a problem related to the airbag system, specifically an issue with the driver’s side airbag circuit. This could involve a malfunctioning airbag module, a broken wire, or a faulty connection. It's important to diagnose the issue accurately, as airbag system faults can affect vehicle safety. A qualified technician should be consulted to perform a thorough inspection and necessary repairs.
I believe that means you have a problem in the fuel level sensor. Usually reads low gas in tank when it's actually not
It's a passenger airbag deactivated mines doing the same at minute
According to the service manual, Airbag Lamp Fault Code 14 means Air Bag Diagnostic Monitor Ground Circuit Open. The manual suggests making sure the Restraints Control Module is securely mounted.
An airbag code 36 typically indicates a fault related to the driver's side airbag, often associated with issues in the airbag system's wiring, connectors, or the airbag module itself. This code can suggest that the system has detected a malfunction that could prevent the airbag from deploying in the event of a collision. It's important to have a professional technician diagnose and repair the issue to ensure the safety systems in the vehicle are functioning properly.
lost battery feed