Yes , the 2.0 liter ( DOHC and SOHC ) engines in a 2000 Ford Focus have timing BELTS
SOHC--Single OverHead Cam DOHC -- Dual OverHead Cam
In North America 2000 CC ( 2.0 liter ) SOHC or DOHC
motorcraft.com shows : 2.0 L - DOHC ( .050 inch ) 2.0 L - SOHC ( .054 inch ) for the 2000 Ford Focus
will a 2000 kia sephia dohc transmission fit on a 1995 kia sephia sohc block?
According to Gates ( they make timing belts etc. ) The SOHC engine IS AN INTERFERENCE ENGINE The DOHC engine is NOT an interference engine in the 2000 Ford Focus
Look on dash and run the vehicle identification number. The dohc has a Z in the ID number and should have 2.3 liter on the engine info under the hood.
i cant tell how to find out its a eci 3000
Yes, they are the same exact blocks and transmissions for SOHC and DOHC. The only difference is the heads and flywheel. As far as I know, you just have to change the flywheel from the SOHC engine and put it on the DOHC motor. Just make sure to put on a new gasket. One more thing is being your putting a dohc engine into a sohc neon, you'll have to change the pcm to a dohc computer or it will run lean and possibly blow the engine. Hope this helps.
SOHC
No. I have 92gsi 1.8 and the axles are about a quarter of inch larger than a old sohc that i had but you can change the inner part of spindle and every thing else will fit
Yes , according to the Gates website ( they make timing belts etc. ) both the DOHC and SOHC engines in a 2000 Ford Focus are interference engines * both engines are 2.0 liters in size *