Time for an oil change.
How do you reset maintenance service indicator on a 2006 Mercedes E350
Problem with the emissions controls. Have it checked for codes.
How do I reset the Service A/B on a CLK 350
To reset the service indicator on a 2006 VW Polo, turn the ignition on without starting the engine. Press the trip button on the dashboard until the service indicator starts flashing. Once it flashes, hold the trip button for a few seconds until the indicator resets. Finally, turn off the ignition and then restart the car to ensure the reset was successful.
unfortunately this is not possible without service workshop dignostic software
You do not reset it, it is a fault code. It is not a routine maintenance indicator. Fix the problem and the light will go out.
Press the step button until 0 miles to service is displayed. Press and hold reset.
To reset the service indicator message on a 2006 Mercedes Benz SLK 280 after completing Service A or B, insert the key into the ignition and turn it to the "On" position without starting the engine. Press the gas pedal three times within 10 seconds, then turn the ignition off. When you start the engine again, the service indicator should be reset. If the message persists, repeat the process.
The service code b124 on a 2006 Honda Accord means that you have turned off the vehicle stability assist system. If it comes on with the VSA indicator light it suggests that there is a problem with the system.
Jeep Commander was created in 2006.
Field Commander happened in 2006.
To reset the service maintenance indicator on a 2006 Mercedes-Benz SLK 200, turn the ignition key to position "2" (without starting the engine). Press the gas pedal three times within ten seconds. Then, turn the ignition off and start the engine to verify that the maintenance indicator has been reset.