0
2.5 four came in the 4 cyl cars
2.8 V6 came in V6 cars
V6 Bolt in replacements:
- 2.8 from any front drive GM
- 3.1 from any front drive GM but requires changing all covers pans etc
- 3.4 Crate motors used to be available from GM Requires drilling starter bolt holes.
Engine swaps:
- 3.4 front drive engines, requires changing to 2.8 heads and custom push rod length
- Quad four engine. Substantial wiring, computer, mount and clutch modifications
- Old aluminum Cadillac V8 again requires substantial modification and will need relocation of transmission
- 3.8 V6, most common is super charged. No difficult clearance issues. Need substantial wiring and exhaust rework. Mounts need to be built and either use automatic trans or special order clutch needed (This is mine)
- Northstar Cadillac V8 Really sweet runner. Big job.
- Chevy Small block. This swap produces the fastest Fiero. solid 10 second 1/4s with no drama. This swap requires rework for substantial side to side clearance issues. Special clutches and adapter kits. Fuel injection requires substantial wiring rework.
What else can I help you with?
Can you fit a Chevy 350 engine into a 85 Pontiac fiero?
YES! You can put ANY small block Chevy into a Fiero. Visit here, http://www.v8archie.com/, there you can find the conversion kit (minus the engine) and answers to all of your questions.
Can you put power steering in a Pontiac Fiero?
Yes. The final year of Fiero production ( 1988 ) had power steering.
How much oil do you need to put in a 1985 Pontiac Fiero GT?
4.5 qts
How much oil do you need to put in a 1986 Pontiac Fiero GT?
4 Quarts
What is the best motor you can put in a Pontiac fiero gt?
I'd suggest a lawn mower motor
Does an 1984 Pontiac Fiero GT have power steering?
No the Pontiac Fierodid not come with power steering.No. They did come out with an Electrical power steering unit, but it only came with the 1988 Fiero's. Look into them. Idkif you can put them on any other year but i would like to know to put it on my 86 GT.
Can you put a transverse engine in a sand buggy?
yep, did it. fiero engine/transaxle in tube frame buggy
Can you put power steering in an '85 Pontiac Fiero that did not come with it?
It is possible It has been done It is both very difficult and expensive.
Why wouldn't a water pump from a 1985 Fiero 2.8 V6 fit a 1987 Fiero 2.8 V6?
My Fiero parts supplier, The Fiero Store, only lists one pump so unless a 3.4 crate motor was put ( I did this to mine ) in they will interchange.
Why wouldn't a water pump from a 1987 Fiero 2.8 V6 fit a 1985 Fiero 2.8 V6?
My Fiero parts supplier, The Fiero Store, only lists one pump so unless a 3.4 crate motor was put ( I did this to mine ) in they will interchange.
What type of oil should I put into my 1984 Pontiac Fiero?
The weight is either 5W30 or 10W30 The trick is to find an additive for "Flat Tappet or Flat Lifter" Engines Current oil will not protect your engine properly without this!
How do you put in a distributor Pontiac fiero?
first of all stop putting water in the fuel tank second move the car to a heated environment
