In terms of power the LS1 is better. They dyno 300 to the wheels stock and run low 13's with an experienced driver. The LT1 cars dyno 240-250 and run low 14's/
lt1 has about 295 stock at flywheel, ls1 has about 305
A vortec 5.7 is a lt1 based engine.
Well depends on how much work you want to do. The engine will fit but the mounting locations are different because 98 was the first year of the LS1 in the Camaro. You are better off with an LS1 it is a much better engine anyways! Well depends on how much work you want to do. The engine will fit but the mounting locations are different because 98 was the first year of the LS1 in the Camaro. You are better off with an LS1 it is a much better engine anyways!
The LS1 and LT1 designations are for the engine not the transmission. A 1993 Camaro Z28 would have originally been fitted with an LT1 engine. Available transmissions behind the LT1 would have been the Borg Warner T-56 (manual), or the 4L60E (automatic).
a stock ls1 always has more power than a stock lt1
No, the motor mounts on an LS1 and an LT1 are not the same. The LS1 uses a different mounting system compared to the LT1, reflecting the design and engineering changes made in the transition from the LT1 to the LS series engines. If swapping between these engines, you'll need to use the appropriate motor mounts designed for each engine type.
350 Ls1 or 350 lt1 but the Lt1 has a cast iron block and the ls1 have a all aluminum block there fore the ls1 block is lighter. "but the make the same horsepower
LT1
you dont have a ls1 you have a lt1. the ls1 was in 98-02 camaro
nope
LT1 has a Opti-Spark distributor, whereas the LS1 is distributor less and has individual coils among other upgrades. Not to mention the cylinder heads on an LS1 were touched by God.
L82 is engine type. To expand on the above, L82 was an option designation, similarly L98 and LT1 and LS1.