The satck is a piece of memory that is allocated on the RAM, that a thread of a computer program uses for most of its variables.
RAM = Random Access Memory
its placed in RAm
In the 8051 microcontroller, the maximum address in the stack is typically 0x07FF, which is the highest addressable location in the internal RAM. However, since the stack grows downwards from the top of the internal RAM, the stack pointer (SP) typically starts at 0x07 and can go down to 0x00. Thus, the effective stack limit is determined by the available internal RAM and the starting point of the stack pointer, which can be set to a maximum of 0x07 in the standard configuration.
You have to check the engine light that is ever on after you put your stack in your 2006 Dodge RAM 2500to ascertain everything is working.
hardware stack - a stack implemented in and entirely managed by hardware, this stack will have dedicated memory and registers in the physical hardware of the system.software stack - a stack implemented with and entirely managed by software, this stack will use a small piece of main RAM and variables declared in the program software (making it much easier to modify if necessary than a hardware stack).
its the ram locations 00-1fh
Bank 1
.STACK reserves bytes in RAM memory for the stack (the place where the processor will keep function calls and parameters)..DATABelow the ".DATA" line you should declare (and optionally define) your variables, so the compiler reserves the corresponding RAM for each of them.Data works differently from stack, as the data segment will keep named values (the variables values) while the stack will not. The stack will grow as needed upto the maximum value defined in the .STACK directive.
part of memory organized in stack
RAM can be part of the CPU.
An offshore column of rock that was once part of the mainland is called a sea stack or stack. It was formed by erosion.
A type of RAM that is organized as a stack. or part of RAM that has software to make it operate like a stack. A stack memory operates like one of those chip dispensers they use in Los Vegas. You push the chips onto the stack. When you remove one (called a pop), it was the one on the top, the last one you put in. The first one you put in is the last one you take out. They are used by certain types of computer hardware and software that needs data accessed in that way, FILO (first in last out) and LIFO (last in first out). For example subroutine return addresses. When the CPU executes a subroutine call, the return address is pushed on the stack. The subroutine may call another subroutine, with another return address pushed on the stack. And more. then when the subroutines are exited, the addresses are POPed off the stack and executed. The use of a stack ensures the returns are all executed in the correct order.