It depends on the type of motorcycle. Dirt bike, cruiser, sportbike? 2-stroke or 4-stroke?
theres only one way to take off the cylinder head....you can take off the cylinder and the head together but it wou be much easier taking off the head first
at the cylinder head end of the sparkplug lead :)
how remove cylinder head
You have to remove the cylinder head(s) to access the lifters.You have to remove the cylinder head(s) to access the lifters.
Yes.
Remove the cylinder head from your VW engine. Remove the head gasket and clean the head gasket surface. Put the new head gasket on and return the cylinder head to its original position.
Start with undressing the cylinder head inlet and exhaust manifolds get a container for bolts and any other small stuff undo all of the cylinder head studs and lift off the cylinder head.
remove head and replace gasket :)
2 hours to remove it :)
You will need to remove the cylinder head from your Chevy Lumina engine. Remove the head gasket and clean the surface. Put the new head gasket on and return the cylinder had to its original position.
You will need to remove the cylinder head from your 1994 Chevy. Remove the head gasket and clean the surface. Put the new head gasket on and put the cylinder head back to its original position.
first, take off the mirrors and upper fairing support (10mm), remove the front and rear seats, remove the four bolts holding down the fuel tank, (2X10mm) (2X8mm),remove the fuel tank, remove the airbox and filter, you will see the cylinder head exposed, you will see the 4 wires and plug caps going down into the cylinder head, these are where the 4 plugs are located, hope this helps
with a bar of soap