Schroeder valve.
the fuel tank crossover valve is located in the trunk area in the spare tire well the easiest thing to do is to get a t fitting and remove the valve and install the fitting instead of replacing the valve
shredder valve.
The math used in tire fitting is algebra. Math helps to determine the size of the tire needed for each vehicle.
To inflate a tire with a Schrader valve, follow these steps: Remove the valve cap from the Schrader valve on the tire. Attach the nozzle of the air pump to the valve. Pump air into the tire until it reaches the recommended pressure level. Remove the nozzle and replace the valve cap.
SCHRADER VALVE Definition: A type of valve fitting that opens when depressed. Schrader valves are used in tire valve stems, on air conditioning hoses and on the fuel rails of many fuel injection systems. http://autorepair.about.com/cs/generalinfo/l/bldef_724a.htm
To use a presta valve adapter when inflating a tire with a Schrader valve pump, you need to screw the presta valve adapter onto the presta valve on the tire. This adapter allows the Schrader valve pump to work with the presta valve. Then, you can use the Schrader valve pump to inflate the tire as usual.
Attached to the valve stem inside the tire/wheel.Attached to the valve stem inside the tire/wheel.
Air leaves a tire when the tire valve is open due to the pressure. The pressure outside of the tire is lower than the pressure inside the tire.
The valve stem should last at least as long as the tire.
a tire or tube in a tire. could be an engine valve you`d probably have to be more spacific
Has the tire valve stem on your vehicle been pushed in?
Have you noticed if the cap on your bike tire valve is missing?