Inspect the fluid level in the brake master cylinder reservoir.
If the brake fluid level is midway between the maximum-full point and the minimum allowable level, no brake fluid needs to be removed from the reservoir before proceeding.
If the brake fluid level is higher than midway between the maximum-full point and the minimum allowable level, remove brake fluid to the midway point before proceeding.
Raise the vehicle and suitably support. Refer to Vehicle Lifting.
Mark the relationship of the wheel to the hub flange.
Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation.
Start at right rear, then left rear, right front, and end at left front.
You will need to remove the tire and wheel from your 1998 Pontiac Grand Am. Remove the brake assembly spring from the brake pads. The brake pads will come off. Reverse the process to install the new brake pads.
yes
The minimum thickness of a brake rotor on a 2006 Pontiac Grand Prix is 1.25 inches. Below this point, the brakes will be less effective.
The brake diagrams, for your 1999 Pontiac Grand Prix SAE, can be obtained from most General Motors dealerships. The brake diagram can also be found at most auto-parts stores.
The 2001 Pontiac Grand Am minimum brake rotor thickness is .075. The minimum brake rotor thickness is a standard minimum. Certified mechanics cannot use the brake rotor when the thickness drops below this level.
Remove the tire and wheel from your 2002 Pontiac Grand Prix. Remove the spring from the brake shoe. Remove the brake shoes. Reverse the process to install the new brakes.
i have a Pontiac grand am 2002 se and i just changed my brakes and the brake lines have 2 washers on them
Under the dash, either on the brake pedal's arm itself, or to the support structure.
possably the switch at the brake? do your brake lights work??
Buy the Haynes or Chiltons book!
The emergency brakes are whatever your rear brake pads are.