0
Contact your dealer. Each vehicle identification number has its own radio code. There are no generic codes. Be prepared to prove ownership when trying to get a code. If it is a junk yard radio they may be able to give you the code from the radio serial number. Most dealers make a copy of your drivers license and put it in the information request to the Ford information system.
What else can I help you with?
The lights of the radio wont turn on a 1999 Ford Expedition Eddie Bauer?
Check fuses , or bulbs in radio burn out.
Which fuse controls the stereo in a 2002 Ford Expedition Eddie Bauer?
F1 is a 25A fuse and it is listed as audio F8 is a 5A fuse listed for the Radio F20 is a 5A Fuse listed as audio
What number on the fuse case is for the radio for the 2003 ford expedition Eddie Bauer?
Check your owners manual. If you don't have one copy & paste this link. http://www.genuineservice.com/genuineservice/en/gloveboxresults
What number on the fuse case is for the radio and clock for the 2000 Eddie Bauer expedition?
Check your owners manual. If you don't have one copy & paste this link. http://www.genuineservice.com/genuineservice/en/gloveboxresults
How do you remove radio from 1999 ford expedtion Eddie Bauer?
To remove the radio from a 1999 Ford Expedition Eddie Bauer, first disconnect the negative battery cable to ensure safety. Use a flat-head screwdriver or a trim removal tool to gently pry off the surrounding bezel or trim panel around the radio. Once the bezel is removed, unscrew the mounting screws holding the radio in place, then carefully pull the radio out and disconnect the wiring harness and antenna cable from the back. Reinstall in reverse order when finished.
Installed a radio but no sound?
you will need to bypass the amps in the passanger side rear of the vehicle if its the Eddie Bauer edition.
How do you get a 96 ford explorer Eddie Bauer radio to illuminate?
the led panel is burnt out you can either take it to a radio repair shop or buy a used radio you can't fix it
Location of radio antenae 2000 Ford Expedition Eddie Bauer?
Our antenna is located on the passenger side rear 1/4 glass, looks like the rear window heat strip, the main antenna wire runs the length of the head liner on the passenger side.
How do you reset the radio on 2005 Eddie Bauer?
To reset the radio in a 2005 Eddie Bauer, first turn the ignition to the "On" position without starting the engine. Then, press and hold the "Power" button on the radio for about 10-15 seconds until the display resets. If that doesn't work, you may also try disconnecting the vehicle's battery for a few minutes and reconnecting it, which can reset the radio system. Always consult the owner's manual for specific instructions related to your vehicle's model.
Where can you find a radio wiring harness for a 1997 Eddie Bauer edition?
You can find a radio wiring harness for your 1997 Ford at most auto-parts stores. Many electronic stores will also have the radio wiring harness.
Is there a switch to turn on and off the fog lamps on a 1999 Ford Explorer Eddie Bauer edition?
Yes , in the center stack of the dash , to the right of the radio
Where on the console is the select switch for 2x4 to 4x4 on 1998 ford explorer Eddie Bauer?
It's in the center stack of the dash , just to the left of the radio
