answersLogoWhite

0

The bolt pattern for a 1990 Ford Taurus is 5 bolts with a spacing of 4.25 inches (or 108 mm) in diameter. This means the wheel has five lug nuts arranged in a circular pattern with that diameter. Additionally, the lug nut thread size is typically 12mm x 1.5.

User Avatar

AnswerBot

6mo ago

What else can I help you with?

Related Questions

What is the bolt pattern for a 2003 Ford Taurus?

5 x 108


What is the bolt pattern on a 2004 Ford Taurus starter for removal?

5x4.25 (5x108mm)


What is the bolt pattern for a 1990 ford crown Victoria?

5x114.3


Can you interchange transmissions in ford Lincoln and Ford Taurus?

Which Lincoln? The Taurus is FWD and most Lincolns are RWD, but the Continental (~'95-on) uses the AX4N transmission which shares the bellhousing bolt pattern with th e Taurus. It would bolt up, but I wouldn't suggest doing it.


Will OEM rims from a 2000 Taurus fit on a 1997 Ford Taurus?

The bolt pattern on the 1996 Taurus to 2004 Taurus is the same , its 5 on 4 and 3/4, so it will fit.


What cars match bolt pattern of 2011 Ford Taurus?

Only the Mercury Sable has the same hub center, below is a list of all rims with the same bolt pattern.


Will rims off 2001 ford f250 4x4 fit on a 1990 ford f250 4x4?

no. the bolt pattern was changed


Will OEM rims from a 2002 Taurus fit on a 1997 Ford Taurus?

Yes, all Ford Taurus lug bolt patterns are the same 1986-2007.


What cars have the same bolt pattern as the 1997 ford Taurus?

Bolt pattern for WHAT ? - Engine oil pan, transmission pan, cylinder head etc ? Give us some real information not just a misleading hint.


How do you measure wheel lug-bolt pattern on 1999 Ford Taurus?

I acquired a '99 Taurus sadan 6-months ago and unfortunately had a flat. I then discovered the spare donut does not fit the bolt pattern on the car. What size and criteria information do I need to look for? The only criteria I couldl find was 5H108 (5 Lug, FWD, 108mm edge of bolt to center of 2nd bolt?)...?


What is the wheel bolt pattern for Ford Edge?

5x114.3 is the bolt pattern for the ford edge


What is the bolt pattern on a 2009 Ford Fusion?

The bolt pattern on Ford Fusion is 5x114.3

Trending Questions
Will a transmission from a 91 blazer fit a 99 s10? What kind of alternator is in a 96 Olds Cutlass Supreme? Does a 1988 2.8 camaro have positive traction? How many miles can you put on a car? Accelerating at 3000rpms a grinding or rattling noise starts to happen? Should a 1999 Dodge 1500 truck 5.2 liter engine ignition coil spark continuously? How fast does an iroc go? I have a 2000 ford focus I ran out of gas and now want crank I tried the gas cut off switch but it still want crank? Why does your speedometer not work and the transmission shift erratic and odometer not work this is on on 1995 Buick riviera supercharger and the problems happened all at once? Will a 4.0 liter straight 6 fit into a 2.5 liter 4 cylinder body with out changing the engine mounts and transmission. what would need to be done about the computer? Why did my 1993 Buick Park Avenue's engine seized? How can you tell if its the solenoid or module when your car stalled and cant get it started again? Are the exhuast manifolds the same on sohc as dohc? Where is the O2 sensor on a 1990 Plymouth Acclaim 3.0 liter 6cyl? What does it mean when there is grinding coming from the front end of my 2000 1500 ram 4x4 when i turn? What is 10 to the 3rd power? Where do you get repair for a 1994 caprice classic that wont turn over and a red light comes on that says pass key fault? What is the coolant capcity of a 1999 wrangler 2.5l engine system? How do you install a ignition lock switch on a 1994 Ford Crown Victoria? Where is the oxygen sensor on a 2001 gmc jimmy?