Hi i am not 100% sure but i think it probably has something to do with you CV axle. It could be the CV boots are worn and or torn and the axle is on it's way out or already is. If you are loosing horse power there's a good chance it's an axle. i had that happen to me on a different car but a lot of the time that's what a clunking noise can be otherwise i would suggest maybe and its a big maybe but the wheel bearings. if you have the money i would say to just have a shop look at it and tell you whats wrong with it. Otherwise you could be playing hit and miss and waste a lot of money on parts and labor if you don't do the work yourself. Hope this helps.
Sounds like your ball joints are shot. Could also be your axles. I had the same noise, clunking when i turned and it turned out to be my axles. Check the boots to see if they are ripped.
check the u-joints in the drive shaft first
It is located about 1/2 way up the right underside of the vehicle. The same on a 1997 Chrysler Concorde How do i have to replace the filter Chrysler Concorde 1994? How do i have to replace the filter of Chrysler Concorde 1994?
Back right side in front of wheel, underneath
It is on the back of the right cylinder head.
TURN THE KEY IN THE DRIVERS DOOR FROM LEFT TO RIGHT
where is the bulkhead connector located on 1994 Chrysler concorde
In the exhaust pipe before the catalytic converter, which is right behind the engine
It is on the far passenger side of the dash. It is to the right of the glove box.
Chrysler LHS was created in 1994.
Chrysler Neon was created in 1994.
A 1994 Chrysler Town and Country only has a driver side airbag.