the gas tank float may be stuck or damage.
No it is not working.
no On a 1985 vt1100 the gauge is on the tank beside the temp gauge
1985
The most common reason for lights failure on 1985-88 Yamaha Virago XV 100's is battery problems. Check to see that the battery is in working condition and sufficiently charged. If the battery is fine, there may be a problem with the main fuse and the ones below the indicator panel.
If the motors are working, then there has to be a problem between the motors and the lights. If they are only "working" though if you bench test them, and they don't actually do anything when you turn on the lights, then there must be an electrical problem such as a break in a wire or a bad ground to the motors.
how do you install a fuel gauge for a 1989 ford 159 econline van?
If the gas gauge on your 1985 Wagoneer is not working, start by checking the fuse related to the instrument cluster, as a blown fuse can cause the gauge to malfunction. Next, inspect the wiring and connections from the sending unit in the fuel tank to the gauge itself for any signs of damage or corrosion. If those components are intact, the issue may lie with the fuel sending unit, which may need to be replaced. Always ensure to take necessary safety precautions when working with fuel systems.
Holbrook Working died in 1985.
Working Class Man was created in 1985.
Concerned for Working Children was created in 1985.
If the horn on your 1985 Corvette isn't working, start by checking the fuse related to the horn in the fuse box, as a blown fuse is a common issue. Next, inspect the wiring and connections leading to the horn, ensuring there are no loose or corroded connections. Additionally, check the horn itself for functionality by applying direct power to it. If all else fails, the problem might lie in the steering wheel horn button or the relay, which may need further inspection or replacement.
The fuel gauge on a 1985 Chevy Silverado will read full all the time if the sending unit is defective or the wire has come loose. When the tank is full, the sending unit normally shuts off which cause the gauge to read full.