27 degrees ( according to my Chilton repair manual )
ANSWER: Having a too small dwell angle can lead to issues in the performance of a system that uses it. A dwell angle refers to the amount of time that a fuel injector or spark plug remains open during an engine's combustion cycle. If the dwell angle is too small, it can result in insufficient fuel or spark being delivered to the engine, which can lead to poor performance, such as misfires or a lack of power. Additionally, a too small dwell angle can also cause increased wear on engine components and can lead to higher emissions. It is important to have the correct dwell angle for optimal performance and longevity of the engine.
22 degrees
your dwell angle will be 29 timing ( initial ) will be 6 degrees below TDC
A dwell meter measures the duration that the ignition points in a gasoline engine remain closed during each cycle, which is crucial for proper timing and efficiency. It connects to the ignition system and displays the dwell angle, typically expressed in degrees. As the engine runs, the meter indicates how long the points are closed, helping to diagnose issues with ignition timing and ensure optimal engine performance. Adjustments can be made based on the reading to achieve the correct dwell angle specified by the manufacturer.
To check the dwell angle without a dwell angle meter, you can use a multimeter set to measure resistance. Connect the multimeter leads to the ignition coil's positive terminal and the negative terminal while cranking the engine. Monitor the voltage drop as the points open and close; this can give you a rough idea of the dwell angle, as it affects the time the points are closed. Alternatively, you can use a timing light to observe the ignition timing, which indirectly reflects the dwell angle.
30 degrees Dwell angle varies from vehicle to vehicle. The dwell angle is the amount of degrees the points are closed
Dwell control is typically defined by the engine's ignition system. The dwell angle is the duration in crankshaft degrees during which the ignition points are closed. This setting affects the timing of the spark, influencing engine performance and efficiency.
The dwell angle for the Toyota 22R engine, which is a four-cylinder engine commonly used in various Toyota trucks and cars, is typically around 30 degrees. This angle refers to the period during which the ignition points are closed, allowing the ignition coil to build up voltage before firing the spark plug. Proper dwell angle settings are crucial for optimal engine performance and efficiency. Always refer to the specific service manual for precise specifications.
Dwell angle in a distributor refers to the period during which the ignition points are closed, allowing current to build up in the ignition coil before it is discharged to the spark plug. It is measured in degrees of rotation of the distributor shaft and affects the timing and intensity of the spark. A proper dwell angle ensures optimal engine performance, as too low a dwell can result in weak sparks, while too high can lead to excessive wear on the points. Adjusting the dwell angle is crucial for efficient engine operation and ignition timing.
28 to 32 for the dwell and for the timing, TDC if it is standard transmission, 4 degrees BTDC if it is automatic transmission.
The dwell angle on a 1968 Mustang with a 289 engine typically ranges from 28 to 32 degrees. Dwell refers to the amount of time the ignition points are closed during each engine cycle, affecting the timing and performance of the ignition system. Proper dwell adjustment is crucial for optimal engine performance, fuel efficiency, and smooth operation. Regular checks and adjustments can help maintain the engine’s efficiency and longevity.
12-16 thou gap and 34-36degree dwell angle for HR.