0
If you are going to change the belt, go to Auto Zone or another parts store and get a manual on your car. It will show you how to do it. cam gear has a notch and a bump which points toward top and sort of lines up with belt cover back plate. crank has a key which lines up to a arrow shaped tab also on the top side of that gear on engine. as for the tensioner belt adjuster, the manual isn't too clear on proper adjustment. good luck
The FSM only that is the factory service manual don't trust any other as the do not always include TSB Technical Service Bulletins. Do not guess unless you have lots of available cash. Check out http://www.suzuki-forums.com/ look for jerrys kick-fix link. He is a Suzuki Tech and he has saved me tons of money.
What else can I help you with?
What are the timing setting on a 1993 Isuzu trooper 3.2 v6?
what are the timing belt setting for a 1993 Isuzu trooper 3.2 ltr v6 ...
How do you set the timing on a 1993 Toyota Corolla?
How do you disconnect the Data Port when setting the timing on a 1993 Toyota Corolla?
How do you set the ignition timing for a 1996 Mazda Protege and what is the correct timing?
Hoo I set the correct timing on a 1993 mazda protege
What is the torque setting for Geo Tracker head bolts?
The torque on my 1993 is 46 ft lbs.
What is the correct timing marks for a 1993 Plymouth sundance?
tdc 12 degrees
What are the timing mark setting for a 1993 Yamaha yz250?
im not sure but check with your local shop
If a 1993 Geo Tracker has a rough idle and you have replaced the plugs wires distributor cap rotor and fuel filter what is next?
try checking youre timing
Will a 1994 Geo tracker hard top fit on a 1993 tracker?
If it fit on a 1994, then it will fit on your 1993 with no problem.....
How do you change a fuel filter on a 1993 Geo Tracker?
93 tracker
What is the timing setting on a 1993 Chevy 1500 pickup with a 350 engine?
0 TDC / Top dead center.
How do you set the timing marks on a 93 Geo Tracker?
To set the timing marks on a 1993 Geo Tracker, first, ensure the engine is at top dead center (TDC) on the compression stroke for cylinder number one. Next, align the timing mark on the crankshaft pulley with the zero mark on the timing cover. Then, check the camshaft timing mark, which should be aligned with the corresponding mark on the cylinder head or timing cover. If necessary, adjust the timing belt to ensure all marks are correctly aligned before reassembling the components.
What the timing setting for a 1993 Pontiac Grand Am?
UNPLUG THE COMPUTER TIMING CONTROL, and set the ignition to ZERO with engine at idle, hook-up PCM control, YOUR DONE! Good luck, Jamison
