The ratio is 9.5.1 in the 350 vortec. Doing a compression test you should not have any below 100 psi and all should be similar to each other.
need a puller to remove the power steering pump pulley, then remove the bolts holding the pump on
9.4:1
it is an 8 cylinder
Look it up. Google search. I had bought a new 1995 5.7 and it was rated at 250 HP. The 1996 Vortec model was rated at 275 HP and HP continued to climb as every year passed. Mark
The lowest reading cylinder should not be less than 70% of the highest and no cylinder reading should be less than 689 kPa (100 psi). Perform compression test with engine at normal operating temperature, spark plugs removed and throttle wide open.
A Vortec engine can be identified by its distinctive design features and specific engine codes. Typically, Vortec engines have a unique cylinder head design with a higher compression ratio and improved airflow, often featuring raised letters spelling "Vortec" on the engine cover. Additionally, you can check the engine's VIN or look for the specific engine codes, such as the LQ4 or LQ9 for LS-based Vortec engines, to confirm its identity. Finally, Vortec engines are commonly found in GM trucks and SUVs from the late 1990s onwards.
eight cylinders
First cylinder up front on the drivers side.
The cylinder compression, for your Polaris ATV, is 14 to 1. The cylinder compression usually decreases as the vehicle gets older.
What is the cylinder compression on a 1991 Ford Ranger with a 2.9?
last cylinder on the passenger side
Number one is the front cylinder on the driver side.