A distributor cap holds all the wires, A coil only has 1 wire in the top of it.
The ignition coil is inside the distributor behind the cap. Remove the distributor cap screws, remove the cap and you will see the coil.
The coil wire runs from the coil to the center of the distributor cap.The coil wire runs from the coil to the center of the distributor cap.
The ignition coil is inside the distributor behind the cap. Remove the distributor cap screws, remove the cap and you will see the coil
There is no distributor cap as there is no distributor. There are 3 coil packs, each coil fires 2 spark plugs simultaneously.
Where all the wires plug into. That is the ignition coil. The ignition coil is inside the distributor behind the cap. Remove the distributor cap screws, remove the cap and you will see the coil.
The ignition coil should be inside the distributor behind the cap. Remove the distributor cap screws, remove the cap and you will see the coil.
On top of each spark plog. The ignition coil is inside the distributor behind the cap. Remove the distributor cap screws, remove the cap and you will see the coil.
It uses a coil pack instead of a distributor cap. Follow a spark plug wire to coil pack.
That is the ignition coil.
It has a coil pack but no distributor.
on the bulkhead, nearside. near the dipstick. it should beinside the distributor behind the cap. Remove the distributor cap screws, remove the cap and you will see the coil.
it doesnt have a distributor cap. it has a coil pack AND...the coil packs are located under the cover on top of the engine.