The gear ratio in a 1989 Pontiac Formula Firebird can vary depending on the specific model and options, but common ratios include 2.73:1, 3.08:1, and 3.23:1 for the standard rear axles. The higher performance models may have a 3.42:1 or 3.73:1 ratio. To determine the exact gear ratio for a specific vehicle, it's best to check the build sheet or rear axle identification codes.
3:42
it only for going up hills in sort
The speed ratio formula is the ratio of the speed of the output gear to the speed of the input gear in a gear system. It is calculated as the number of teeth on the input gear divided by the number of teeth on the output gear.
Number of teeth on driven gear divided by teeth on driven gear. Example: 40 teeth on a ring gear and 10 teeth on a pinion will be a 4.00:1 ratio.
Number of teeth on driven gear divided by teeth on driven gear. Example: 40 teeth on a ring gear and 10 teeth on a pinion will be a 4.00:1 ratio.
The Plastic Gear Inside the Headlight is Worn, atleast half of it. You can buy a metal gear for $40 and replace the plastic gear.
You can calculate the rotation speed (rpm) of a wind turbine by dividing the rotational speed of the generator (usually given in revolutions per minute, or rpm) by the gear ratio of the turbine. The gear ratio is the ratio of the number of teeth on the turbine's gear to the number of teeth on the generator's gear. This formula allows you to determine the turbine's rpm based on the generator's rpm and the gear ratio.
The fourth generation General Motors F-Body (Camaro/Firebird) was offered in multiple rear end gear ratios. These included 3.02, 3.42, and 3.73.
The gear ratio of a train, also known as its speed ratio, is the ratio of the angular velocity of the input gear to the velocity of the output gear. The gear ratio is very important when it comes to physics.
You have a stripped gear inside the door.
you have air in the lines bleed the slave
Incorrect gear ratio in first gear.Incorrect gear ratio in first gear.