There are different options for gear ratios , check the tag at the differential . If the tag is missing you can determine the ratio by dividing the number of teeth on the crown gear by the number of teeth on the pinion gear.
Some crown gears have the ratio stamped on them.
In some 1982 Ford f100 trucks I know they have a 4.10 Gear ratio like my truck but with that gear ratio if you go over 55 mph you can say goodbye to your gas mileage so get a smaller gear ratio.
what is the axle gear ratio for a 1998 ford ranger 4x4 4.0l?
There are four ways to find a ratio. 1 A dealer can normally tell from the vin number. 2 There are normally tags or labels on the axle that have part number, gear ratio, and fluid requirement info. 3 You can count how many times you have to turn the driveshaft to get one complete turn of the tires. 4 You can divide the number of teeth on the ring gear and divide by number of teeth on the pinion.
There are four ways to find a ratio. 1 A dealer can normally tell from the vin number. 2 There are normally tags or labels on the axle that have part number, gear ratio, and fluid requirement info. 3 You can count how many times you have to turn the driveshaft to get one complete turn of the tires. 4 You can divide the number of teeth on the ring gear and divide by number of teeth on the pinion.
The rear end gear ratio on a 1980 Oldsmobile is 3.73, in the overdrive gear. The low gear ratio is 1.43.
A good majority of the 1984 Ford F150 gear ratio had 3.00 gears for the stock. In addition, the spline should be a 31.
3.73
what is the rear end gear ratio on a 4800lb tow rating on a 2006 ford f-150 triton 5.4 litre 4x4 truck
probably 4.10
3.55
I ASSUME axle code " 86 " is the same as it is on the ( 1996 ) Ford Ranger ( 3.73 gear ratio , conventional / non - limited slip )
6000