i own a shop in GA and we have a few s/10s. but to better answer your question without cutting any thing and with the truck at the stock suspension level you can fit a 22 but you will have to run a 265 / 35 R 22 tire but if its bagged you need to chose a good offset for one of my trucks the front is a +11 and the rear is a +8 "this is the dish of the rim the front is more of a face rim and the rear is a lip rim like a Lamborghini" but as far as how big you can go we built a body droped, bagged chopped top, s/10 with 28's , the wheels come through the hood and the side of the top of the bed, it looks cool but not practical.
will 24" fit my 87 caprice
what is the valve settings surposed to be for a 87 s10 chevy pickup 2.8 ci
im not sure about the offset but i know a 17x10 wheel will fit if you remove the quadshocks and roll the fender lip
If the engine size is the same, probably
i needi have an 87 4 +cylender 2.5 Chevy s10 pickup and need the timing diagram in order to get it running. can you help?
3600 pounds ...
Probably 31x10.50. My 31s rub just a hair on my 87 pickup.
This can be done, though some modifications may be needed. If you need to replace your core support (rad support) as well, order a core support for a 91 S10 blazer. This will help do away with the mounting issues. I did this to a 1985 S10 blazer and the grill fit fine with the factory core support, but not all of the mounting locations matched.
it may not be easy but it will fit because I have a 87 Buick gn motor in an 87 s-10 so it will fit.
Yes but it will have a remainder because 87 is not a factor of 5738
4x6 in the dash and 6x9 in the rear
The 89 is an s5 and the 87 is an s4 It will fit but might take minor modification.